Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultrason® E 6020 P - PESU - BASF

Material Data Center offers the following functions for Ultrason® E 6020 P:
unit conversion, PDF datasheet print, comparison with other plastics, application examples, CAE Interfaces

Check here, which other Ultrason E datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
Polyethersulfone flakes, e.g. for membrane applications and coatings.
Abbreviated designation according to ISO 1043-1: PESU
Proprietà Meccanichesecco/condUnitáNorma del test
ISO Data
Modulo a trazione - / 2650 MPa ISO 527
Carico unitario a trazione - / 85 MPa ISO 527
Deformazione a snervamento - / 6.9 % ISO 527
Resistenza all'urto Charpy, +23°C - / N kJ/m² ISO 179/1eU
Resistenzia all'urto Charpy con intaglio, +23°C - / 7.5 kJ/m² ISO 179/1eA
ASTM Data
Modulo a flessione 2599 / - MPa ASTM D 790
Proprietà Termichesecco/condUnitáNorma del test
ISO Data
Temperatura di transizione vetrosa, 10°C/min 225 / * °C ISO 11357-1/-2
Temp.di inflessione sotto carico, 1.80 MPa 207 / * °C ISO 75-1/-2
ASTM Data
Temperatura di fusione 225 °C ASTM D 3418
Altre Proprietàsecco/condUnitáNorma del test
Assorbimento d'umidità 1 / * % Sim. alla ISO 62
Densità 1370 kg/m³ ASTM D 792
Proprietà Specifiche Materialesecco/condUnitáNorma del test
ISO Data
Numero di viscosità 81 / * cm³/g ISO 307, 1157, 1628
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Forma fisica disponibile
Polveri, Colore naturale
Disponibilità geografica
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.